Drill Out Delta Set Screw. With the drill set to reverse (the cutting direction for lh drill bits), use short bursts, slow speed and check regularly to see if the setscrew has come loose. It took me several days of. Cartridge is from amazon rp25513. The drill bit will be long enough to clear the handle and the bit od will be small enough that it won't damage the threads in the. If the set screw is stripped, try a rubber band on the end of the allen key. Common problem so i am going to drill it out: It may fill the gap enough to get a grip. If the screw won't turn, it probably needs a few. Drill out the stuck set screw with a bigger drill (11/64). * guy on youtube says start with 1/8 inch bit and finish up with 7/32 bet. The drill bit is long enough to clear the handle and has a small enough od that it won't damage the threads in the setscrew hole. Be careful not to drill. I stripped out the hex screw while trying to remove the shower handle.
Be careful not to drill. If the set screw is stripped, try a rubber band on the end of the allen key. I stripped out the hex screw while trying to remove the shower handle. Cartridge is from amazon rp25513. If the screw won't turn, it probably needs a few. Drill out the stuck set screw with a bigger drill (11/64). Common problem so i am going to drill it out: The drill bit will be long enough to clear the handle and the bit od will be small enough that it won't damage the threads in the. With the drill set to reverse (the cutting direction for lh drill bits), use short bursts, slow speed and check regularly to see if the setscrew has come loose. * guy on youtube says start with 1/8 inch bit and finish up with 7/32 bet.
Delta Bathroom Faucet Set Screw Rispa
Drill Out Delta Set Screw The drill bit is long enough to clear the handle and has a small enough od that it won't damage the threads in the setscrew hole. Drill out the stuck set screw with a bigger drill (11/64). Be careful not to drill. Common problem so i am going to drill it out: The drill bit is long enough to clear the handle and has a small enough od that it won't damage the threads in the setscrew hole. With the drill set to reverse (the cutting direction for lh drill bits), use short bursts, slow speed and check regularly to see if the setscrew has come loose. Cartridge is from amazon rp25513. If the screw won't turn, it probably needs a few. The drill bit will be long enough to clear the handle and the bit od will be small enough that it won't damage the threads in the. It may fill the gap enough to get a grip. If the set screw is stripped, try a rubber band on the end of the allen key. It took me several days of. * guy on youtube says start with 1/8 inch bit and finish up with 7/32 bet. I stripped out the hex screw while trying to remove the shower handle.